63
Listening to RDS Broadcasts (European models only)—Continued
If the station you are currently tuned into is broadcasting
RT signals, they will be displayed in the front display on
the TX-NR5000E. If the station does not, this function
will be ignored.
• If the current station you are listening to is not an RDS
station, only the frequency of the station will appear.
• If “Waiting” appears on the display, more time is
required to receive the RT information. When the
information is received, the characters will scroll
across the front display.
• If “No Text Data” appears on the display, RT informa-
tion is not available.
• The display shows the frequency for 3 seconds and
returns to program service name.
Displaying Radio Text (RT)
To display the radio text, press the
[RT/PTY/TP] button once.
Performing a PTY Scan
1
Press the [TUNER] input source
button and select the FM input
source.
2
Press the [RT/PTY/TP] button
twice.
The current program type appears on the
display.
3
Using the [SELECT/PRESET] dial,
select the PTY program type you
desire.
OFF
ON
STANDBY/ON
STANDBY
PURE AUDIO
MASTER VOLUME
POWER
OPEN
ZONE 2
()
GREEN
MAIN
()
BLUE
REC
/
ZONE 3
(
)
RED
DISPLAY
DVD
VIDEO
3
VIDEO 4 VIDEO 5 VIDEO 6 VIDEO 7VIDEO 2VIDEO 1
MEMORY
SETUP
EXIT
PHONES
VIDEO 7 INPUT
S VIDEO
DIGITAL
AUDIO
VIDEO L R
LISTENING
MODE
AUDIO
SELECTOR
TONE
CLEAR
RT/
PTY/
TP
ZONE
2 REC/
ZONE 3
LEVEL LEVEL
SELECT/
PRESET
CONTROL
/
TUNING
PUSH TO ENTER
PUSH TO ENTER
C
D NET AUDIOPHONOTUNERTAPE 1 TAPE 2
TUNING
MODE
SELECT/PRESET
TUNER
RT/PTY/TP
RT/PTY/TP
TUNER
RT/PTY/TP
SELECT/PRESET
4
Press the [SELECT/PRESET] dial.
The TX-NR5000E will scan until it
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it
reaches the next station. Pressing the
[SELECT/PRESET] dial stops the PTY
scan at that point. If you press the [RT/
PTY/TP] while “NONE” is displayed,
“PTY ?” will appear. In this case, return
to step 3.
5
Press the [SELECT/PRESET] dial
when it reaches the station that
you want to listen to.
“Not Found” will appear when no RDS
signal is being received from the station.
Performing a TP Scan
1
Press the [TUNER] input source
button.
2
Press the [RT/PTY/TP] button
three times.
“[TP]” will appear if the current station
is broadcasting TP signals. This station
will periodically broadcast traffic infor-
mation. To find a different station, pro-
ceed to the next step. Also, if “TP” is
displayed, proceed to the next step.
3
Press the [SELECT/PRESET] dial.
The TX-NR5000E will scan until it
reaches a station broadcasting traffic
information. If “Not Found” appears on
the display, a TP station cannot be
located.
SELECT/PRESET
SELECT/PRESET
TUNER
RT/PTY/TP
SELECT/PRESET
