18
1 46
8
2 3 5 7
FG9 IH
(
European
and
Taiwanese models)
Rear Panel
1
RI REMOTE CONTROL jack: An Onkyo product with RI
jack can be connected and synchronized with this unit.
2
: The supplied
antennas are connected.
3
COMPONENT VIDEO IN/OUT jacks: Component video
input/output jacks
4
ETHERNET port: Used for LAN connection
5
HDMI IN/OUT jacks: Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
6
SPEAKERS terminals: Speakers are connected. To
use the multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
7
Power cord (North American, Australian and Asian
models)
AC INLET (European and Taiwanese models): The
power cord is connected.
8
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
signals are input.
9
GND terminal: The ground wire of the turntable is
connected.
F
COMPOSITE VIDEO/AUDIO IN jacks: Analog video
signals and audio signals are input.
G
MONITOR OUT V jack: Video signals are output to the
connected monitor or TV via a composite video cable.
H
PRE OUT SUBWOOFER jacks: A subwoofer with built-
in amplifier is connected.
I
LINE OUT ZONE 2/ZONE 3 jacks: Audio output jacks
connected to the integrated amplifier for multi-zone
playback in a separate room.
14 623 75
Display
1
Lights in the following conditions.
"Z2" "Z3" (
¼
1): ZONE 2 or ZONE 3 output is on. /
"HDMI": HDMI signals are input and HDMI input selector
is selected. / "ARC": Audio signals are input from ARC
compatible TV and TV/CD input selector is selected. /
"3D": Input signals are 3D. / "USB" (
¼
2): "USB" input is
selected and USB storage device is connected. /
"NET" (
¼
2): "NET" input is selected and the unit is
connected to the network. / "DIGITAL": Digital signals
are input and the digital input selector is selected. /
Cursor indicators: NET or USB is controlled.
¼
1 Both "Z2" and "Z3" light when the WHOLE HOUSE MODE function
is on.
¼
2 "USB" and "NET" will flash if the connection is not correct.
2
Lights when headphones are connected.
3
Lights when NET or USB is controlled.
4
Lights according to the type of input digital signals and
the listening mode.
5
Lights when Music Optimizer is enabled.
6
Lights in the following conditions. "AUTO": Tuning mode
is auto. / "
f
TUNED
e
": Receiving AM/FM radio.
fe
flashes while tuning is automatically performed. / "FM
STEREO": Receiving FM stereo. / "RDS" (European,
Australian and Asian models): Receiving RDS
broadcasting.
7
"MUTING": Flashes when muting is on.
8
Lights in the following conditions. "SLEEP": Sleep
timer has been set. / "ASb": Auto Standby is on. / "ch":
Channel is being set. / "Hz": Crossover frequencies are
being set. / "m/ft": Speaker distances are being set. /
"dB": Speaker volume is being set.
9
Displays various information of the input signals.
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
