61
Basic Operations
—Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Analog,
PCM*1
1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz, respec-
tively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo.
Dolby D
DTS/DTS 96/24*2
2. In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else is processed as DTS.
Multich
3/2, 2/2 2/0 1/0,1+1 Other 3/2, 2/2 2/0
1/0,
1+1
Other
DTS-
ES
Source
CD, TV, LD,
VHS, MD,
turntable,
radio,
cassette,
DTV, etc.
DVD, DTV, etc. DVD, LD, CD, etc. DVD
Listening mode
Pure Audio
❍
❍❍❍❍
❍
❍
❍❍❍ ❍
Direct
❍
❍ ❍ ❍ ❍
❍ ❍
❍ ❍ ❍ ❍
Stereo
❍❍❍❍❍
❍❍
❍❍❍
Mono
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
PLIIx Movie/Music/Game *3
3. If the SurrBack parameter is set to “None,” or the Zone 2 speakers are being used, PLII is used.
❍❍ ❍
Neo:6 Cinema
❍ ❍ ❍
Neo:6 Music *4
4. Available only when Surround speakers are connected.
❍❍ ❍
Dolby D
❍ ❍
Dolby D EX *5
5. Cannot be selected if the SurrBack parameter is set to “None” or the Zone 2 speakers are being used.
❍
Dolby D+PLIIx Movie *6
6. Cannot select if the SurrBack ch setting is not set to “2ch,” or the Zone 2 speakers are being used.
❍
Dolby D+PLIIx Music *5
❍
DTS, DTS 96/24
❍ ❍ ❍
*7
7. If the SurrBack setting is set to “None,” or the Zone 2 speakers are being used, DTS is used.
DTS+Neo:6 *5
❍
DTS+Dolby EX *5
❍
DTS+PLIIx Movie *6/Music *5
❍
DTS-ES Discrete *5
Discrete
DTS-ES Matrix *5
Matrix
Multich
❍
Mono Movie
❍ ❍❍❍❍❍❍❍❍❍
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Full Mono
❍ ❍❍❍❍❍❍❍❍❍
