Copy Features
39
Advanced Features
The Advanced Features option includes the following:
• Output – to change the tray that your copies output to. The option can
be set to either the Exit Tray, the left-hand side Output Tray, or the Top
Tray, the tray above the printer where print jobs are output.
• If the 10 Bin Sorter option is attached, there are other output selections
available. Refer to Determining Output with the Optional 10 Bin Sorter
for additional information.
• Erase – to set an erase value from 0 — 50 mm for the following
dimensions on your copy output:
• Horizontal
• Vertical
• Center
The DP-C106 Copier/Printer automatically creates a 4 mm border on every
copy. This is not an erase feature and can not be deleted.
• 2-Sided – to produce double sided output, output with images on both
the front and back sides, from single sided input. The following
orientation options are available for the 2-Sided feature:
• Portrait – to have the images flip along the long edge of the output.
• Landscape – to have the images flip along the short edge of the
output.
• 2 Up – to copy two images onto a single page. The following image
positions are available for the 2 Up feature:
• ON (L➙R) – to position the images in order from left to right.
• ON (R➙L) – to position the images in order from right to left.
You can not use the 2 Up feature with the following:
• 2-Sided Selection
• Auto Paper Tray Selection
• Auto Reduce/Enlarge Feature
