A SERVICE OF

logo

4-40 System Programming
4.2 System Programming
Redialing After Pulse to Tone Conversion
119
Description Enables or disables sending tone dialing to the Central Office when
an extension user redials after changing from pulse to tone mode by
pressing and #.
Selection Enable / Disable
Default Disable
Programming 1. Enter 119.
Display: Redial After #
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Pulse to Tone Conversion