Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
System
Features
Static DHCP
When you use the DHCP server function, the KX-HGW600 can assign static IP address
to each device by registering its MAC address.
1. Click [Add] in the Static DHCP table.
PPPoE
When PPPoE Connection is used to connect to the ISP, you can select how to initiate/
stop the PPPoE Connection. First, select how to connect from the Connection.Ifyour
payment plan with your ISP is not the unlimited Internet access and you are charged
according to your usage, it is recommended that you check Automatic or Manual.
Enabled/Disabled Check Enabled or Disabled. When you check Enabled,the
KX-HGW600 assigns static IP address to each device which has
a specified MAC address. When you check Disabled,theentry
does not work but will work when you check Enabled later.
IP Address (LAN) Enter the static IP address of the corresponding Network
Camera and PCs.
MAC Address Enter the MAC address of the corresponding Network Camera
and PCs. Separate each two-digit group (0-9, A-F or a-f) by
entering a colon ":" between them (e.g., 01:23:45:ab:cd:ef).
