A SERVICE OF

logo

14
English
Indicator / Control panel
When pressing 8, 9, 10 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight the pressed button.
11
21 3
9
8
10
456
7
Rear side of the TV
26 mm
1 Built-in Camera
Automatically comes out and back in by the
operation of a camera application.
Do not pull or push the camera by hands.
For the information of the camera operation, refer
to [eHELP] (Functions > Built-in Camera).
2 Lens part
3 Angle adjuster
Adjusts the angle of lens.
4 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
5 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
6 Power LED
Red: Standby
Green: On
Orange: Standby with some functions (recording,
etc.) active
The LED blinks when the TV receives a command
from the remote control.
7 Human activity sensor
For the information of the sensor operation, refer to
[eHELP] (Functions > Info Bar).
8 Input mode selection
Press repeatedly until you reach the desired mode.
[Main Menu]
Press and hold for about 3 seconds to display main
menu.
OK (when in the menu system)
9 Channel Up / Down
Cursor Up / Down (when in the menu system)
Slide your finger to move the cursor
(on internet contents or [Cursor
Settings] in [VIERA Touch Pad
Controller] (Setup Menu)), select
the item, adjust levels, etc.
Trace the fringe to scroll.
Installing / Removing batteries
Slide open
Note the correct
polarity (+ or -)
Close
Note
It is recommended to hold Touch Pad Controller with
your hand when using.
The battery power will be used whenever you use
Touch Pad Controller (including the touch of the touch
pad) even if not operating the TV. It may decrease the
battery life.
Some operations differ depending on the application.