17
Adjustment of the clock of the recorder
Adjust the clock of the recorder as follows. Check the clock periodically and correct it in the following way if it displays wrong
time. It is also necessary to correct the clock after replacing the built-in backup battery.
Screenshot 1
Display the setup menu by pressing the SETUP button.
Step 1
Move the cursor onto "System Setup", and then press the
[SET] button.
Screenshot 2
The "System Setup" window will be displayed.
Step 2
Set the time and date using the camera selection buttons
(1 - 10/0).
Step 3
Move the cursor to "Time Zone", and then select a time
zone using the skip buttons (sd).
Step 4
When completing the adjustment, move the cursor onto
"SET" and press the [OK] button.
→ The adjusted time and date will be applied.
Important:
When the clock is adjusted during recording, some of
the recorded images cannot be searched.
