Traps & MIBs
C-4
6371-A2-GB20-10August 2000
NOTE:
The System Name, System Contact, and System Location objects
can be configured via the port card (A-F). Values will display in Monitoring
(B-E). However, the DSL router uses and displays the SNMP information set
via the System Group.
Table C-2. System Group Objects
Object
Description Setting/Contents
sysDescr
(system 1)
Provides a full name and version
identification for the Hotwire system’s
hardware and software.
The object is set to display a string in the following format:
PARADYNE Hotwire DSL; Model:
xxxx-xx-xxx
; S/W
Release:
yy.yy.yy;
H/W Revision:
zzz;
Serial Number:
ssssssssssss
; Boot:
bb.bb.bb
;
2nd
Boot:
xx.xx.xx
;
DSP:
xxx
Model starts with the 4-digit model number:
H 6301 – IDSL router
H 6302 – IDSL 4-port router
H 6341 – SDSL router
H 6342 – SDSL 4-port router
H 6371 – RADSL router
sysObjectID
(system 2)
Identifies the network management
subsystem for the DSL router.
OIDs (Object Identifiers):
H 1.3.6.1.4.1.1795.1.14.9.9.35 – 6301 IDSL router
H 1.3.6.1.4.1.1795.1.14.9.9.36 – 6302 IDSL 4-port router
H 1.3.6.1.4.1.1795.1.14.9.9.25 – 6341 SDSL router
H 1.3.6.1.4.1.1795.1.14.9.9.26 – 6342 SDSL 4-port router
H 1.3.6.1.4.1.1795.1.14.9.9.29 – 6371 RADSL router
sysContact
(system 4)
Provides the contact information for
the person managing the DSL router.
ASCII character string (32 characters), as set by the user:
H badValue(3) – Field length exceeded.
sysName
(system 5)
Provides a contact name for the DSL
router.
ASCII character string (32 characters), as set by the user:
H badValue(3) – Field length exceeded.
sysLocation
(system 6)
Provides the physical location for the
DSL router.
ASCII character string (32 characters), as set by the user:
H badValue(3) – Field length exceeded.
sysServices
(system 7)
The DSL router provides routing and
host application services; i.e., Ping
and TraceRoute.
H physical(1) – Layer 1 functionality for DSL and Ethernet
interfaces.
H datalink/subnetwork(2) – Layer 2 functionality for:
– DSL interface and
– Ethernet interface (LLC)
H internet(4) – Layer 3 functionality (IP) for all
management links.
H end-to-end(8) – Layer 4 functionality (TCP) for all
management links.
H application(64) – Layer 7 functionality (TCP) for all
management links.
Object is set to 4+8+64 (76).
