A SERVICE OF

logo

7 of 11
ISSUED: 10-01-10 SHEET #: 095-9354-1
Set control box into lower mount plate (C) and place assembly onto back of display.
Secure assembly to back of display by reinstalling two M4 chrome plated screws (included with display) into ultra-
slim wall mount bar, four M4 black phillips screws (included with display) into lower mounting holes of control box,
and four M4 x 16 mm phillips screws (M) into upper mounting holes of control box.
5
M4 CHROME SCREWS
CONTROL
BOX
ULTRA-SLIM WALL
MOUNT BAR
DISPLAY
M4 BLACK SCREWS
Install two 1/4-20 x 1/2" thread forming screws (L) into lower mounting plate (C) leaving 1/8" exposed thread as
shown below.
4
C
L
M