196 C2630M-C (7/09)
Assigning an Exception to An ATM/POS Device
To assign an exception to an ATM/POS device:
1. In the Network page, click the Port/Device tab. The Port/Device page is displayed.
2. In the Communication Port drop-down box, select a port (Port 1 to Port 4). The device mode option is not available for COM1.
3. In the selected device drop-down box, select an ATM/POS device.
4. In the Communication Port Configuration section, click Configure. The Device Configuration page is displayed.
5. Click the Advanced tab.
6. In the ATM/POS Name drop-down box, select an ATM/POS device.
7. In the Exception Table, click the ID box of the exception you want to assign to the ATM/POS device.
8. Do one of the following:
• Click OK to accept the changes and exit the Exceptions dialog box.
• Click Cancel to exit the Exception dialog box and not save the changes.
Figure 156. Assigning an Exception to an ATM/POS Device
Verifying the ATM/POS Communication Connection
To verify that the ATM/POS connection is working correctly:
1. In the Network page, click the Port/Device tab. The Port/Device page is displayed.
2. In the Communication Port drop-down box, select a port (COM1 or Port 1 to Port 4).
3. In the selected device drop-down box, select an ATM/POS device.
4. In the Communication Port Configuration section, click Configure. The Device Configuration page is displayed.
5. Click the Diagnostics tab.
6. In the ATM/POS Information section, select the ATM/POS device in the Device ID drop-down box.
ᕤ
ᕥ
