117
2
Taking Pictures
1
Press the Movie button in still-picture capture mode.
Recording starts.
2
Press the Movie button.
Recording stops.
Change the movie settings in the [C Movie] menu.
1
Press the 3 button in movie mode.
The [C Movie 1] menu appears.
2
Use the four-way controller (23)
to select an item and change its
setting.
3
Press the 3 button after changing the setting.
The setting is saved and the camera returns to capture status.
• When recording starts using the Movie button, the number of recorded
pixels is fixed to 1920×1080 and the frame rate 30 fps.
• [Movie SR] (Movie Shake Reduction) is fixed to O (On).
• The recorded area of a movie becomes smaller, both horizontally and
vertically, than the image shown on the display before recording.
Changing the Movie Settings
Movie button
1
MENU
Full
HD
Exit
Custom Image
Recorded Pixels
Movie SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
