67
Taking Pictures
66
Taking Pictures
Changing the AF Area (Focusing Area)
You can change the range of the autofocus area.
Multiple Normal area
Spot The area becomes narrower.
z Select [Focusing Area] on the [Rec.Mode] menu.
x Use the four-way controller ( )
to change the setting.
c Press the Playback/OK button.
The camera is ready to take the pic-
ture.
The AF area does not appear in the viewfinder. Always check the
focusing area on the LCD monitor.
Menu button
Playback/OK button
Four-way controller
Manual Setting
z Select [ ] (manual) on the white
balance screen.
x Point your camera at a blank sheet
of paper so that it fills the screen.
c Press the Display button.
Adjustment will start and [Adjusting]
will appear on the LCD monitor. When adjustment has been
completed, [Complete] will appear on the LCD monitor and
the screen will return to the menu screen.
v Press the Playback/OK button.
The camera is ready to take the picture.
If the Display button is again pressed while [Adjusting] is displayed
on the LCD monitor, the white balance adjustment will be repeat-
ed, starting from the beginning. Press the Playback/OK button to
cancel adjustment while in progress.
