Before Using Your Camera
1
13
d AF point switching dial
Sets the AF point. (p.44)
e S (Rear) e-dial
Changes setting values.
Changes the magnification in enlarged view and displays multiple
images during playback. (p.67, p.68)
Switches between the menu tabs when a menu is displayed. (p.40)
f AF mode switching dial
Switches between the autofocus modes (l/A). (p.44)
g Q (Playback) button
Switches to the Playback mode. (p.38) Press again to switch to
Capture mode.
h M button
Displays the control panel. (p.16)
Displays shooting information during playback. (p.17)
i 3 button
Displays the [A1] menu. (p.40) Next, press the 5 key to display
other menus. Displays the [Q1] menu first during playback.
When a menu is displayed, press this button to cancel a selection
or return to the previous screen.
j E (Flash mode) button
Sets the flash mode. (p.58)
k y (Custom Image) button
Sets the Custom Image settings. (p.62)
l d (Mirror Up) dial
Enables the mirror lock-up shooting. (p.55)
m I (Illumination) button
Illuminates the LCD panel. (p.22)
n L button
Locks the exposure. (p.49)
Saves the preview image when setting White Balance or Custom
Image. (p.50, p.62)
o = button
Operates in the same way as when pressing the shutter release
button halfway and temporarily provides manual focus. (p.44,
z p.R31)
p 2345 (Four-way controller) keys
When the control panel or menu is displayed, use these keys to
move the cursor or change items.
When the AF point switching dial is set to j (Select), use these
keys to change the AF point. (p.45)
Press the 3 key to display the playback mode palette during
playback. (p.66)
q Y button
Sets the drive mode. (p.53)
r n (White Balance) button
Sets the white balance. (p.50)
s i (Delete) button
Press to delete an image during playback. (p.67)
t | (Green) button
Sets the exposure mode to Automatic Exposure and resets the
setting values.
u u button
Turns the status screen display on/off. (p.15)
Switches between the SD Memory Cards to play back during
playback. (p.66)
v 4 button
When the control panel or menu is displayed, press this button to
confirm the selected item.
When the AF point switching dial is set to j (Select), use this
button to return the AF point to the center. (p.45)
