31
When using a hood with a 02 STANDARD ZOOM lens, be sure
to use the PH-RBB 40.5mm. If the PH-SBA 40.5mm is used,
vignetting may occur at the wide-angle setting.
Vignetting will occur at the wide-angle setting if the 100 PL
FILTER is used with a 02 STANDARD ZOOM lens.
A K-mount lens can be attached to this camera with the use
of the optional Adapter Q for K Mount Lens. When a K-mount
lens is used, the focal length must be set manually for some
functions such as Shake Reduction, since the focal length
cannot be obtained automatically.
1 Turn the camera off.
2 Attach the adapter and lens to the camera,
and turn the camera on.
The [Input Focal Length] screen appears.
3 Set the lens focal length.
Available operations
When using a zoom lens, select the actual focal length
which the zoom is set to.
4 Press E.
The camera returns to standby mode.
tMemo
• The focal length setting can be changed in [Input Focal
Length] of the A2 menu.
• When the Adapter Q for K Mount Lens is used, the camera
operates in J mode when the capture mode is set to other
than L mode.
• Refer to the Adapter Q for K mount lens manual for details.
About Hoods
About Filters
Using a K-Mount Lens
Cancel
Input Focal Length
300.0
200.0
135.0
77.0
55.0
35.0
21.0
15.0
OK
OK
MENU
0000.0
mm
AB
Changes the value of each digit.
CD
Selects a digit.
V
Selects a value from the list.
QS1-SG-EN.book Page 31 Friday, August 8, 2014 8:51 AM
