Installation and commissioning
22
8.03 Commissioning the machine
● Check machine and in particular
electric lines for damage before fi rst
commissioning.
● Remove pin 1 of the oil reservoir 2
(Fig. 8 - 08).
The pin serves only to protect
the machine from damage
during transport and must not
be used when sewing.
● Clean the machine thoroughly and oil it
(see chapter 10 Care and maintenance).
● Have skilled personnel check if the ma-
chine can be operated with the available
mains voltage.
Do not operate the machine if there is any discrepancy.
The machine may only be connected to an earthed socket!
Have home position of the machine drive verifi ed by certifi ed technicians
before fi rst commissioning! Have settings carried out my technicians where
required (see chapter 8.05)
8.04 Switching the machine on/off
● Switch the machine on (see Chapter 7.01, On/off switch).
Fig. 8 - 08
1
