19
SOUND MENU CONTROLS
Incr. Surround
Incr. Surround
or Stereo
Spatial
or Mono
or
L
R
1
Press MENU button on the remote control
to display the onscreen menu.
2
Press CURSOR > to until the Sound menu
feature is highlighted.
3
Press
CURSOR > or < to adjust
Treble: Enhance the high frequency sounds.
Bass: Enhance the low frequency sounds.
Balance: Level of sound coming from the left
and right speakers.
AVL: (Auto Volume Leveler) When turned
On, AVL will level out the sound being heard
when sudden change in volume occurs during
commercial breaks or channel changes.
Incr. Surround: Select Incr. Surround or
Stereo settings if you're in Stereo mode.
Select Mono or Spatial if you're in Mono mode.
SAP: Secondary Audio Programming is sent as
a third audio channel, a SAP signal can be heard
apart from the current TV program sound.
Note: If SAP is not present on a selected show,
No SAP will be displayed on the TV screen.
Sound: toggles between Stereo or Mono
settings.
Note: If Stereo is not present on a selected
show and the TV is in Stereo mode, the sound
coming from the TV will remain in the Mono
mode.
MENU
>
>
< >
AUTO SOUND
1
Press AUTO SOUND button on the remote
control. The current Auto Sound setting will
be displayed in the middle of the TV screen.
2
Press AUTO SOUND repeatedly to
toggle between the four settings. (Personal,
Theatre, Music, or Voice).
NOTE: The way you choose to set the Sound Menu
Controls will become your Personal setting.
T
he Auto Sound feature allows the listener to select between four different pre-set sound options.
AUTO
SOUND
T
o adjust your TV sound, use the Sound Menu Controls listed below.
Your selection is stored as Personal.
Digital Mode Analog Mode
