6
6
The TV’s controls
1. Mains power Switch on or off the TV.
2. Red light indicator When light is on, it indicates that the TV is on
standby. Note :If no signal is detected by the
TV after 10 minutes, it will switch to standby
automatically.
3. Remote control sensor For the remote control to work, it must be
activated within the operating range of this
sensor.
4. Headphone socket For connection of headphones.
5. AV “in” sockets Connect to Video “out” and Audio “out”sockets
of VCR, laser disc player etc.
6. Volume adjustment To adjust volume level. Press these 2 keys
simultaneously will call up the 1st level menu.
Press these 2 keys again will exit menu. Works
as cursor left (A L) or right (A K) in a menu.
7. Channel selection To select a lower or higher channel number.
Works as cursor up (P +) or down (P -) in a
menu.
1
2
3
4
6
7
4
3
K
K
L
L
P
A
Front control
Top control
Side sockets
5
28241/p2-9 7/6/00, 3:10 PM6
