12 EN
3 Get started
Caution
Use the controls only as stated in this user manual.•
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your DC350.
The model number and serial number are on the bottom of your DC350. Write the
numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.•
For fi rst-time use:
1 Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before pressing any function button on the remote control, fi rst select the correct source with the
remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove the battery.
•
•
DC350_12_Book 1.indd 12DC350_12_Book 1.indd 12 11/7/2008 2:05:17 PM11/7/2008 2:05:17 PM
