English
21
Clock/Timer
Notes:
– Timer is not available in TAPE or AUX mode.
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
– If USB source is selected and no compatible
USB device is plugged, TUNER will be selected
automatically.
Activating and deactivating
TIMER
● In standby or during playback, press TIMER
once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
● Press SLEEP on the remote
control once or more.
➜ Display shows and one
of the sleep time options in
sequence: 60, 45, 30,15, 0,
60... if you have selected a
time.
● To deactivate, press SLEEP on the remote
control once or more until “ 0“
is shown, or
press STANDBY ON ECO POWER on the
system (or 2 on the remote control).
➜ disappears from the display.
Setting the clock
1 In standby mode, press and hold DISPLAY/
CLOCK on the set (or CLOCK on the
remote control) for 2 seconds.
➜ The clock digits for the hours flash.
2 Press TUNING 4 ¢ to set the hours.
3 Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
4 Press TUNING 4 ¢ to set the minutes.
5 Press DISPLAY/CLOCK to confirm the time.
Note:
–The backlight for clock display is off in standby.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER or USB is switched
on at a set time. The clock time needs to be set
first before the timer can be used.
1 In standby mode, press and hold TIMER about
2 seconds on the remote control.
2 Press SOURCE (or CD/USB/TUNER on the
remote control) to select sound source.
3 Press TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4 Press TUNING 4 ¢ to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press TUNING 4 ¢ to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
PG 001-024_MCM204_12-Eng 6/17/08, 11:2621
