16
English
CD/MP3-CD Operations
IMPORTANT!
The lens of the CD player should never be
touched.
X
Discs for playback
This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
Playing a disc
1 Select CD source.
2 Press OPEN/CLOSE 0 on the front panel to
open the CD compartment.
➜ “OPEN” is displayed.
3 Insert a disc with the printed side facing up and
press OPEN/CLOSE 0 to close the CD door.
➜ “READING” is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time (or the total
number of albums and tracks for MP3 disc) are
shown.
4 Press ÉÅ to start playback.
To interrupt playback
● Press ÉÅ.
● To resume playback, press ÉÅ again.
To stop playback
● Press Ç.
Notes:
– Disc play will also stop when you select another
source or the disc has reached the end.
–For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Text display
During CD playback
● Press DISPLAY repeatedly to see the following
information.
➜ Track number and elapsed playback time of
current track.
➜ Track number and remaining playback time of
current track.
➜ Track number and total elapsed playback
time.
➜ Track number and total remaining playback
time.
During MP3-CD playback
● Press DISPLAY repeatedly to select two
display modes : ID3 ON and ID3 OFF.
ID-3 ON ➜ The current track information
(album name, track name, and ID-3 tags) scrolls
cyclically.
ID-3 OFF ➜ Only playback time is displayed.
Selecting a different track
● Press TUNING S / T repeatedly until
the desired track number appears in the display.
● If playback is stopped, pressÉÅ to start
playback.
pg 001-029_MCB395_05-04 2008.5.2, 17:3216
