21
English
EN
9 Radio
Auto-tune to FM radio
stations
The auto-tune feature searches for FM radio
stations and then stores the frequencies of the
rst 20 stations under preset numbers.
Here is how to auto-tune to FM radio stations:
1 Set the mode selector to position .
2 Connect the earphones with the wire
fully extended.
The earphone wire acts as antenna. »
3 Navigate the main menu to select
[Radio].
4 Navigate the preset menu, and then press
to select an unassigned preset.
5 Select [Yes] to conrm the screen
prompt.
CAM searches the FM frequency »
band for radio signals of broadcasting
stations.
CAM stores the rst 20 radio signals »
under the preset numbers.
CAM displays the list of presets*. »
Note
*In areas of low radio signal reception, CAM •
displays the manual tuning screen so you can
manually tune to a radio station.
Listen to FM radio
1 Set the mode selector to position .
2 Connect the earphones with the wire
fully extended.
The earphone wire acts as antenna. »
3 Navigate the main menu to select
[Radio].
4 Navigate the list to select a preset.
Press • to toggle between “sound
off” and “sound on”.
Tip
In radio mode, press • to view more radio
options.
Manually tune to FM radio
stations
In areas of low radio signal reception, CAM
displays the manual tuning screen so you can
manually tune to a radio station.
Here is how to manually tune to FM radio
stations:
1 While in the manual tuning screen, press
/ to slowly scan the FM frequency
band.
2 Press and hold / to quickly scan the
FM frequency band.
Tip
Press • to view more options.
