Philips indoor luminaires8.28
Maxos
Light-line systems
MaxosTL-DIP63closedreectorunits
Maxos IP63 closed reector units are ready-to-install dedicated
luminaires for the Maxos trunking system. They are designed for
industrial applications requiring good protection of reectors against
dust, in particular the automotive industry and food industry. The unit
can be easily cleaned with a wet cloth.
The housing is made of steel with a white coating, while the cover is
made of tempered glass or, optionally, polycarbonate (PC); the inner
reector is made of aluminum.
Maxos IP63 closed reector units combine the functions of Maxos
electrical units, reectors and covers. They are designed for reliable
mounting on Maxos trunking sections in TL-D lengths. A connector
block is mounted on top of the units for electrical connection to the
trunking. Mechanical connection is realized by means of a safe bracket
with knee-lever clasp around the trunking. IP63 classication is valid
for the complete lamp, optical and ballast compartment; however, the
classication for the total system including IP20 trunking sections is
IP20.
The standard range is 1-lamp and 2-lamp TL-D 58 W with HF or
conventional ballast and TL5 80 W with HF ballast, all to be mounted
on the TL-D Maxos trunking system, optionally with EL3 emergency
lighting.
The units come with inner aluminum reectors for wide-beam (WB)
or asymmetrical-beam (A) light distribution. White louvers (4MX093
1/2 58 L-IP63-unit WH) are available as accessories.
Please note that Maxos is not designed for application in regular humid
environments.
Maxos TL-D
IP63 Reector unit
Type 4MX014
Lamp Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 58 W or 1x
or 2x TL5 80 W
Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
Reector Wide beam (-WB)
Asymmetric (-A)
Option Emergency lighting: 3 hours (EL3)
Material Housing: steel, white coated
Cover: tempered glass (GT) or polycarbonate
(PC) (optional)
Accessory Steel, white inlay louver (4MX093 1/2/58 L-IP63-
unit WH)
Remarks The electrical connection to the trunking is realized
via a pre-mounted connector block, the mechanical
connection via a bracket with knee-lever clasp
around the trunking
IP63 for optical compartment inclusive lamp- and
ballast compartment only, can be used with regular
IP20 at ribbon trunkings
Main applications Industry: automotive and food (cleanable front
screen)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Maxos 4MX014 IP63 closed reector
unit
Maxos 4MX014 IP63 closed reector
unit with louver
Indoor_2008_Chapter_08_LIS.indb 28 20-05-2008 13:23:25
