Option 1:
Direct connection
Choose this option if you want to
connect Music Center to a
Standalone PC without
LAN/Wireless Network
1 In Software Installation page, click to select
Music Center connect to Standalone PC,
no LAN/Wireless Network
2 When prompted by the installation wizard,
ensure the supplied Ethernet cable (straight
cable) is connected to Center’s ETHERNET
port
3 Follow the screen instructions to finish the PC
connection.
➜ The screen shows:“The connection to your
Music Center has been established”
4 Click Next to start DMM installation.
➜ The icon appears on your computer
desktop after DMM installation is finished.
Express Installation
Tips:
– If your PC is also connected to Internet via XDSL modem, use a wired router
or wireless access point and follow the installation steps of Option 2 and
Option 3. Otherwise, manually change your PC’s IP from its orginal one to IP
address: 192.168.107. 20, Subnet mask: 255.255.255.0 or vice versa.
To configure your IP, go to Start menu - Settings - Control Panel - Network Connections
– Properties. Scroll to Internet Protocol (TCP/IP) .
Option 2:
Wireless connection
Choose this option if you want to con-
nect Music Center to a wireless.
Router/ wireless Access Point or an
existing wireless network
1 Check the wireless router/access point is working
properly. Write down its SSID and also the WEP or
WPA key if it is enabled in the router/access point
2 In Software Installation page, click to select
Music Center connect to Wireless Network
3 When prompted by the installation wizard, ensure
the supplied Ethernet cable (straight cable) is con-
nected to Center’s ETHERNET port
4 When the screen on the right appears,
a. Input the SSID you wrote down in the above
step 1
b. In WLAN mode, click Infrastructure mode
c. Input the WEP or WPA key you wrote down in
the above step 1
5 Follow the screen instructions to finish the PC con-
nection.
➜ The screen shows:“The WiFi settings of Music
Center have been changed. ...... ”
Tips:
– It is recommended that WEP key encryption be used for better network performance and
security.
– In Infrastructure mode, Channel is assigned automatically by the router/access point.
Express Installation
Connect to PC-Eng 2005.6.29 10:39 Page 2
