PHYSICAL DIMENSIONS
STUD-LOCK MOUNTING SYSTEM™
(SOLD SEPARATELY)
While not absolutely necessary, the Stud-Lock
Mounting System™ does help ensure that LC
i-RTS
Series speakers perform at their optimum. The
mounting system creates a rigid platform for the
LC
i-RTS100, increasing bass performance, clarity
and reducing unwanted structure borne vibration.
Stud-Lock Mounting System
™
Installation
See the instructions included with each Stud-Lock
Mounting System
™
.
Important Note: For new construction: If you are using
a pr
e-constr
uction bracket, always install it first befor
e
installing the Stud-Lock Mounting System
™
.
If you are installing a pre-construction bracket (PB100)
and a Stud-Lock Mounting System (STL100) together
, be
aware that the speaker’s enclosure can catch on the
edge of the pre-construction bracket. Push the bottom
of the loudspeaker enclosur
e up and over The protrud-
ing edge of the pre-construction bracket. This will
fully seat The loudspeaker in the ceiling.
SPECIFICATIONS
Model LCi-RTS100
Recommended Amplification 10-200W
(W/channel)
Impedance(Nominal) 4 Ohms
Frequency Response (+/-3dB) 50Hz – 27kHz
(80Hz-26kHz)
Efficiency (2.83V@1M) 92db
Speaker Weight 12.5 lbs.
TWEETER
NORM. CUT
WALL DIST.
>60cm<60cm
>2<2
Cutout Diameter
12 1/2" (31.75cm)
Overall Diameter
14" (35.56cm)
For mor
e infor
mation visit our website at www
.polkaudio.com
3
Mounting Depth
8 3/4" (22.2cm)
(8 1/4" with 1/2" drywall)
