8-12
hsb
2
PLUS Series LCD Display
Display Unit
Connection
Display Unit Connection
The rear of the
hsb
2
series LCD display provides the following connection
sockets:
• Scanner (antenna) connection
•
hsb
2
, in/out connector for connecting to another
hsb
2
or HSB series display.
• SeaTalk, for SeaTalk data input and output and connecting to another
hsb
2
series display (such as a chartplotter or second radar display).
• NMEA Output, for NMEA data output in an integrated system.
• Power/NMEA Input, for 12 V, 24 V or 32 V DC power connection, two
NMEA 0183 inputs and one RF ground (screen) connection.
Figure 8-5: Radar Display Connector Panel
The following sections detail the display unit connectors used when installing
a single
hsb
2
series LCD Display. The remaining connector details are
provided in Section 8.8.
NMEA
OUT
POWER/NMEA
TRANSDUCER
SeaTalk
HSB
R
G
Y
To NMEA instruments
NMEA IN 2
D5576-1
POWER IN
NMEA IN 1
To other hsb
2
displays
To SeaTalk
instruments/GPS
To radar scanner unit
81186_2.book Page 12 Monday, December 17, 2001 8:35 AM
