7
RF-AHD35
Using the hard drive enclosure
Installing your hard drive in the enclosure
Read these safety precautions before you install your hard
drive in the enclosure:
• Use only the accessories provided in the accessory
package.
• Always unplug the AC power adapter before installing
the hard drive.
• Do not use a power supply with a different voltage
rating.
• Make sure that you first touch an unpainted, grounded
metal object to discharge any static electricity stored on
your clothing or body before touching any electronic
components.
• Handle the printed circuit board (PCB) edges only. Avoid
touching the onboard electronic components.
To install your 3.5" SATA hard drive in the enclosure:
1 Remove the four screws from the back of enclosure, then
open the front cover plate.
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 7 Friday, September 25, 2009 6:51 AM
