INSTALLATION AND SETUP
4
Connect the AC power
cord.
+I
Plug one end of the cord into the
back of the machine and the other end
into a standard grounded 3-prong AC
power outlet.
The polarized 3-prong plug only fits into
a 3-pin outlet one way. If you cannot
plug the cord into your outlet, contact
an electrician to replace the obsolete
outlet.
Installing Paper
1
Unplug the power cord.
2
Open the Cover by lifting
the Release Lever on the
side of the fax machine.
3
Insert the paper roll.
4
If there is an adhesive sticker
sealing the paper roll, remove it
completely. Be sure the paper exits from
the top of the roll as shown.
The outer diameter of the paper roll
should not exceed 2.05 in (total length of
the paper roll is approximately
98.4 ft).
2.2 CHAPTER Two: INSTALLATION AND SETUP
