16 Desktop SSHD Product Manual, Rev. B
Drive Specifications www.seagate.com
• Idle mode power
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a
random track location.
• Standby mode
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/
write electronics are in power-down mode.
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels.
†5W IDLE with DIPLM Enabled
Figure 1 DC power requirements (4-disk: 4TB model)
Power dissipation (4-disk values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps
Spinup — — 2.0
Idle* † 6.20 0.50 0.31
Operating 7.50 0.48 0.43
Standby 0.750 0.138 0.005
Sleep 0.750 0.138 0.005
Table 2 DC power requirements (2-disk: 2TB model)
Power dissipation (2-disk values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V amps
Spinup — — 2.0A
Idle2* † 4.50 0.196 0.296
Operating 6.70 0.525 0.340
Standby 0.75 0.136 0.005
Sleep 0.75 0.136 0.005
Table 3 DC power requirements (1-disk: 1TB model)
Power dissipation (1-disk values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V amps
Spinup — — 2.0
Idle2* † 3.36 0.152 0.216
Operating 5.90 0.500 0.329
Standby 0.63 0.111 0.006
Sleep 0.63 0.111 0.006
