Page 14 Verify WAN / LAN Connection
Verify WAN / LAN Connection
Once the cables are correctly connected, the WAN and LAN (1) lights on the
front panel of your SonicWALL TZ 180 illuminate as illustrated below:
Note: In order to connect to the SonicWALL TZ 180, your computer
must be set to accept dynamic “DHCP” addressing. For more
information on configuring DHCP, turn to Appendix A:
Configuring DHCP IP Addressing section, on page 25.
Link/ACT (WAN / LAN 1) - A solid light
Indicates a network connection is present
between the SonicWALL TZ 180 and
another network appliance. A blinking light
indicates connection activity.
10/100 (WAN / LAN 1) - A green light
Indicates a 10 Mbps port connection. An
amber light indicates a 100 Mbps port
connection.
