10
GB
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 3. For
KDL-60NX725, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Be sure the TV is on the vertical position before
switching on. TV set must not powered on with
LCD panel face down to avoid uneven picture
uniformity.
2: Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles as
illustrated.
Angle adjustment (Swivel)
(except KDL-60NX725)
~
• When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over.
Angle adjustment (Tilt)
(except KDL-60NX725)
~
• Ensure that there are no objects in front of the TV.
• Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
20°
20°
20°
20°
0° - 6°
Intelligent Presence Sensor
3D Sync Transmitter
IR Sensor
