29
GB
1 Press OK to select “Manual Programme Preset”.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to
select the programme number with the channel. You cannot select a programme number
that is set to skip (page 30).
2 Press M/m to select one of the following options, then press OK.
Manual Programme Preset
Option Description
Programme Presets programme channels manually.
1 Press M/m to select “Programme”, then press OK.
2 Press M/m to select the programme number you want
to manually tune (if tuning a VCR, select channel 0),
then press <.
3 Press M/m to select “Channel”, then press OK.
4 Press M/m to select “S” (for cable channels) or “C” (for
terrestrial channels), then press ,.
5 Tune the channels as follows:
If you do not know the channel number (frequency)
Press M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
6 Press OK.
7 Press OK to select “Confirm”, then press OK.
Repeat the procedure above to preset other channels manually.
Channel
Using the Menu
