Getting Started
5
Setting up the remote commander
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (
•
) can be used to operate your
Sony TV. If the TV does not have
the symbol near the remote
sensor, this remote commander
will not operate the TV.
123
g
Remote sensor
[TV]
/
[VIDEO ]
To operate Set
[TV]
/
[VIDEO]
to
the VCR
[VIDEO]
and point at the remote sensor on the VCR
a Sony TV
[TV]
and point at the remote sensor on the TV
continued
