Additional Operations
76
Audio dubbing
Audio dubbing
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start
…
• Turn on the TV and set it to the video
channel
To stop while editing
Press STOP on this VCR and the stereo system (or other VCR).
AUDIO DUB
CLEAR
PAUSE
1
Insert a source tape into the stereo system (or the playback VCR). Search for the
point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this (recording) VCR.
Search for the end of the section to be replaced and press PAUSE.
3
Press CLEAR to reset the counter to “0H00M00S.”
4
Rewind the prerecorded tape to the beginning of the section to be replaced.
The VCR enters pause mode.
5
Press AUDIO DUB.
The indicator appears in the display window.
6
To start editing, press the PAUSE buttons on this VCR and the stereo system
(or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops automatically.
