Getting Started
49
Setting the PAY-TV/Canal Plus decoder
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• To superimpose subtitles while watching PAY-TV/Canal Plus programmes, make
both decoder-VCR and VCR-TV connections using 21-pin Scart cables that are
compatible with the RGB signals. You cannot record subtitles on the VCR.
• When you watch PAY-TV/Canal Plus programmes through the RFU input of the
TV, press t TV/VIDEO so that the VIDEO indicator appears in the display
window.
• If POWER SAVE is set to FULL, you cannot watch or record PAY-TV/Canal Plus
programmes during standby mode. Set POWER SAVE in the OPTIONS-2 menu
to OFF or PARTIAL.
• If STB CONNECTION is not set to OFF at the SET-TOP BOX screen, you cannot
select DECODER for DECODER/LINE3. In this case, set the Set-Top Box setting
to OFF and then make the DECODER/LINE3 selection.
12
Press M/m to select the PAY-TV/Canal
Plus channels, then press OK.
13
Press M/m to highlight PAY-TV/
CANAL+, then press OK.
14
Press M/m to highlight ON, then press
OK.
15
Press MENU to exit the menu.
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
TUNER
C
LMN02
PROG. 5
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
OFF
ON
RETURN
1
OK
PLAY
MENUEXIT :
TUNER
PROG. 5
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
ON
OFF
RETURN
1
CONFIRM :
SELECT :
OK
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
TUNER
C
LMN02
PROG. 5
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
ON
ON
RETURN
1
MENU
