SET UP CABLE BOX SET UP
AUTO PRESET
SET UP is done
PROCESSING
Please wait!!!
Normal display
MENU
Press MENU and select SET VCR Plus+ TIMER SET / CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
SET VCR Plus+ CHANNELS
CABLE BOX CONTROLS
ADVANCED OPTIONS
Use to select an
item, then push OK
Press CURSOR to select AUTO and SMART CHANNEL MAPPING
AUTO MANUAL
Press POWER to turn off the VCR.
Use to select
Then push OK
Push MENU to quit
The VCR receives the program information signal from 0:00 am to 5:00 am
while the VCR is turned off, and set up the channel for VCR Plus+ recording.
After channel setup is finished, you can record TV programs using VCR
Plus+. For details, see page 49.
* It takes about 1 hour to complete channel setup.
* The VCR can receive the program information signal only while the VCR is turned off and no timer
recordings are set.
* If the channels in your area don't carry the program information signals, set the program guide channels
manually. For details, see page 51.
* If the Choose your Cable CH MAP menu appears the first time you turn on the VCR after finishing
channel setup, select the MAP number. For details, see page 50.
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you do not want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page 37.
continued
