35
CHAPTER 4 – Admin User Interface
Use the•
U
and
V
buttons to highlight the option you
wish to edit.
Use the •
S
and
T
buttons to increase or decrease the
highlighted value.
Alternatively, press the •
O
Edit button to enter a value
using the alphanumeric keypad.
The panel on the right of the screen shows the original
color in the top half of the square, and the new color below
it.
After making any changes, use the •
M
Save button to
commit them.
System Information
The System Information screen shows details of the sys-
tem that are useful for installers and technicians, as well as
end-users. You should only enter into this screen if instruct-
ed to do so by your installer or Sunre Technical Support.
Output Conguration
This screen allows you to make several changes to the
way your TGM-100 interfaces with the rest of the system.
You should only change the Audio Format if needed.
Audio Format changes the audio outputs from Surround
mode to Stereo mode. When Surround is selected, the
analog outputs are disabled. When Stereo is selected, the
analog outputs are enabled and all digital audio outputs will
send a stereo signal.
Media Transfer Settings
Media Transfer Settings allows music to be shared on
your PC for backup purposes and to add, delete and edit
media on the TGM-100. This should normally be set to
Media Export: Enabled.
