SVAT ELECTRONICS
now you can see
CLEARVU4 41
Delete User: Delete user account.
Current Users: Currently registered users.
Reboot: Restart the Network DVR.
Firmware update: Updates the rmware, if a new rmware version becomes available. Firmware
updates may be available at www.SVAT.com (advanced users only).
Restore factory default conguration: Click “Restore factory default conguration” to return to
factory default settings (Please restart the Network DVR after setup has been completed)
9. DVR TROUBLESHOOTING
Before calling technical support 1.866.946.7828, try the following troubleshooting tips:
Problem Solution
No picture
- Make sure the TV/monitor is on the correct input channel
- Check all connections and make sure cameras/DVR
are powered on
No sound
- Make sure that audio is enabled in the DVR menu
- If using a microphone, ensure that it is connected and
turned on
- If using an audio supported camera, ensure that sound
is enabled
- Check all RCA audio connections
No images is shown on the
web page
- Please follow “8.4.1 Install ActiveX”, setup the IE set-
tings, and install ActiveX.
IPEdit is unable to detect
the DVR’s IP Address
- Please check your rewall or antivirus software.
Some software may block IP edit from accessing the
network. In Windows Firewall, you may have to add
IPedit.exe to the “exceptions” list.
- Reconnect the Ethernet cable
- See the network guide for more troubleshooting tips.
