TELUS Mobility™
16 www.telusmobility.com
32. Select the following value on the Communication Settings window:
• Click the Auto Detect to have the software automatically check for the COM Port or select the appropriate COM
Port (typically COM1)
• Multiple Baud rate should be unchecked
• Baud Rate: 19200 (bps)
The program will check the communication settings and attempt to connect to the modem
33. The Packet Data Configuration window opens. Select No, I would like to configure my modem later or my modem
has already been configured then click Next.
34. The Installation Complete window opens. Select Finish on the following screens to complete the installation process.
35. The Setup Complete window opens. Click Finish.
Windows 2000 and XP
The following steps describe how to download and install the iDEN
Packet Data Applet on a Windows 2000 or XP operating
system.
NOTE: Administrative rights are required to install the software on Windows 2000. Contact your IT Representative or
Systems Administrator for assistance.
1. You can access the link to the iDEN
Packet Data Applet by going to www.elutions.com/wireless website.
2. From the eLutions wireless website, click on the Product Support link, to navigate to the Product Support page.
3. From the Product Support page, scroll down and click on the iDEN
Packet Data Applet link.
4. The iDEN
Packet Data Applet page appears.
5. From the iDEN
Packet Data Applet screen, click on the Download button next to the iDEN
Packet Data Applet
section to download the software
6. The File Download window appears. Click on the Save button to continue. The download program will copy the files
that are needed to install the software to the appropriate location on your computer.
IMPORTANT: When you have finished downloading the program, you MUST connect the data cable to your modem
and computer before proceeding further.
7. Find the program in the appropriate folder and double-click the Setup.exe to launch the program to initiate the
installation process.
NOTE: The setup.exe will be contained in a zip or compressed file.
8. Click Next on the Welcome to the Installshield Wizard for iDEN
Packet Data Applet window.
