Tonka Playskool Manual

Open as PDF

next previous

ASSEMBLY

Basic

Attach rear axle

assembly to truck body

with the 2 screws.

Push Mode

1. Make sure seat

is locked in the

“down” position.

2. Make sure gravel

guard is locked

in the “down”

position.

Walk Mode

2. Attach seat in the

“up” position. Push

down until the

buttons click to

lock seat in place.

1. Remove seat by

pressing both

buttons at the

same time and

lifting the seat up.

Ride-on Mode

3. Remove gravel guard by pushing

both buttons at the same time

and lifting the gravel guard up.

1. Remove seat by

pressing both buttons

at the same time and

lifting the seat off the

truck body.

2. Attach seat in the

“down” position. Push

down until the buttons

click to lock seat

in place.

NOTE: Seat must be in “down” position for child to ride on

vehicle. Never allow child to sit or ride on gravel guard.

4. Attach the gravel guard

in the “up” position by

pushing both buttons

at the same time and

inserting guard vertically

into slot, then pushing

down on the gravel guard

until buttons click and

guard is locked in place.