Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
Selecting the PC/HDMI 1 audio mode
You can select PC audio or HDMI 1 audio when using this
function.
1
Press
MENU
, and then press
v
or
w
to display the
SETUP
menu.
3
Press
s
or
r
to select
PC/HDMI 1 Audio
, and then
press
v
or
w
to select
PC
or
HDMI 1
.
Setting the HDMI 1 audio mode
You can select from three sound modes for an HDMI or
DVI device connected to the HDMI 1 input terminal:
Auto
,
Digital
or
Analogue
.
Note:
This function is available only when the PC/HDMI 1
Audio mode is set to
HDMI 1
.
1
From the
AV Connection
menu, press
s
or
r
to
select
HDMI 1 Audio
.
2
Press
v
or
w
to select
Auto
,
Digital
or
Analogue
.
Selecting the HDMI settings
The HDMI Settings menu consists of the following 3
items:
Lip Sync
,
INSTAPORT™
and
RGB Range
.
Some early HDMI equipment may not work properly with
your HDMI TV. If you experience trouble, unplug your
HDMIcablerstandthentrysettingthersttwooptions
to
Off
. This should allow your early HDMI source to
operate properly with your TV.
1
From the
AV Connection
menu, press
s
or
r
to
select
HDMI Settings
, and then press
Q
.
2
Press
s
or
r
to select each item, and then press
v
or
w
to select the desired setting.
Lip Sync mode
This option activates an audio/video display timing
adjustment function that allows HDMI source devices to
accuratelyperformsynchronizationautomatically.
All of the above HDMI settings require a proper HDMI
source device.
If HDMI source products do not support these functions,
the TV may not work properly when activating these
functions.
INSTAPORT™ mode
This feature reduces the lag time when switching HDMI
sources.
RGB Range mode
This feature adjusts RGB full range signal automatically.
When
Limit
is selected, RGB output signal is output in
the range from 16 to 235. When
Full
is selected, RGB
output signal is output in the range from 0 to 255.
Notes:
• In a non-HDMI signal mode, this function is not
available.
• If your HDMI connection is capable of 1080p and/
or your TV is capable of refresh rates greater than
60Hz or supports Deep Colour, you will need a
Category2 cable. Conventional HDMI/DVI cables
may not work properly with this mode.
