25
9.REMOTE CONTROL :
RS-422 Control (Factory-setting) supported TOSHIBA-P and TOSHIBA-D.
Tx of the communication line from KBD is connected to Rx of the camera, and Tx-is con-
nected to Rx-of the camera.
A controllable function is as follows.
Preset Number / Key Function
Function
↑ (TILT) Valid when the OSD menu is displayed
The same operation as when a ▲
button has been pressed
→ (PAN) Valid when the OSD menu is displayed
The same operation as when a ▼
button has been pressed
↓ (TILT) Valid when the OSD menu is displayed
The same operation as when a ▼
button has been pressed
← (PAN) Valid when the OSD menu is displayed
The same operation as when a ▲
button has been pressed
Valid when the OSD menu is displayed
The same operation as when a
SELECT button has been pressed
IRIS Open
Valid when the OSD menu is not displayed
ALC setting +1
IRIS Close
Valid when the OSD menu is not displayed
ALC setting -1
71 GO Backlight compensation AUTO
72 GO Backlight compensation OFF
75 GO Software version display
88 GO Valid during ADVANCED mode
SHUTTER NO-D/N
89 GO Valid during ADVANCED mode
SHUTTER D/N
87 GO Valid during ADVANCED mode
SHUTTER S..D/N
95 SET Enter MENU mode
Rx Rx G
Tx-
Tx+
Camera
terminal
Rx-
Rx+
Twisted pair line
2 wires
Control
