A SERVICE OF

logo

TL-WN951N 300Mbps Wireless N PCI Adapter
37
Figure 4-6
4.2 PIN method
There are two ways to configure the QSS by PIN method:
1) Enter a PIN into your AP device.
2) Enter the PIN from your AP device.
Following are the detailed configuration procedure of each way.
4.2.1 Enter a PIN into your AP device
1. Double click the icon on the desktop to open the QSS Utility and then you can see the
welcome screen shown as Figure 4-4. Click Next to continue. Figure 4-5 will appear. Select
the second option, and you will see the PIN value of the adapter which is randomly
generated. Click Next.