A SERVICE OF

logo

24
8
SOFTWARE
INSTALLATION
This section describes the Software installation procedure of the
Wireless Internet Camera for Web Configuration and IPView SE
application.
Web Configuration
The Wireless Internet Camera must be configured through its
built-in Web-based Configuration.
Extensive knowledge of LAN will be helpful in setting up the
Wireless Internet Camera
From the web browser, enter the default IP address to access the
Welcome screen of the Wireless Internet Camera. To configure
your Wireless Internet Camera, type http://192.168.0.20 in the
25
address box. The number is the default IP address of your
Wireless Internet Camera. Then, press [Enter]
.
Note:
The PC’s IP address must correspond with the Wireless
Internet Camera’s IP address in the same segment for the two
devices to communicate.