24 • ADVANCED CALLING
Placing a Call Using Relay Dial
1. Make sure the Superprint Pro80 is on. The Power light should be lit.
2. Press the button. DIALING... is displayed followed by the
number of the TRS that you have programmed for this button.
3. When the Relay service TTY starts ringing, the Superprint Pro80
Signal light flashes slowly and LINE IS RINGING is displayed.
4. When the Communications Assistant (CA) answers the call, his or
her greeting is displayed on your TTY. Type instructions for the CA
such as the number and the name of the person you wish to call. The
CA will dial the number of the person you are calling and type
information such as whether the phone is ringing or busy.
5. When the person answers the phone, the CA will introduce the call
and begin typing everything that the other person says.
6. When the other person says GA, begin typing what you want to say.
The CA will read what you type to the person you are calling.
7. Continue your conversation.
Relay
4. Press . ** RELAY
NUMBER SAVED ** is
displayed.
Enter
3. Type the telephone number for
your local Telecommunications
Relay Service (TRS).
You may use punctuation such as
dashes. There is space for up to
20 characters. Use the
key to correct mistakes.
Back Space
