— 11 —
LOADING AND UNLOADING
Place the grid in the desired position. Pull the grid out for loading. Load as quickly as possible and
avoid spillage. Push the grid back into place and cook for the appropriate time. Lower and pull the grid
out for unloading.
CLEANING
Farboil Grey Epoxy surfaces can be cleaned using a cloth with detergent solution. Rinse thoroughly
and wipe dry with a soft clean cloth. An occasional application of silicone base auto polish will help
maintain a "like new" appearance.
Stainless steel surfaces may be cleaned with a damp cloth. Stubborn soil can be removed with a
detergent solution. Rinse thoroughly and wipe dry with a soft clean cloth.
Clean the grid every day at nightly shutdown. Allow the broiler to cool before removing the grid and
the drip tray for cleaning.
MAINTENANCE
WARNING: THE BROILER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING,
CLEANING OR SERVICING THE BROILER.
VENT
Annually, after the broiler is cool, check the flue and clear any obstructions.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning the broilers covered in this manual, contact the
Vulcan-Hart Service Depot in your area (refer to listing supplied with the broiler), or Vulcan-Hart
Company Service Department at the address or phone number shown on the front cover of this manual.
