WARNING:
Do not use steel pellets, darts or similar
unsuitable ammunition.
• Put the airgun "ON SAFE" (see chap. 2.1
"Handling the safety").
• Pull back the bolt lever of the rotary magazine retainer slide
(see the sequence in illustration 4.a).
• Remove the drum from the airgun (illustration 4.b).
• Load the drum magazine by inserting diabolo pellets in its holes
(illustration 3.a).
The diabolo pellets are held in place by an o-ring that traps them.
• Your new airgun has been tested for faults with all the pellets
described in the accessories section. Pellets with a maximum
total length of 10 mm may be loaded.
• Do not use previously fired or damaged pellets.
• Do not use pointed pellets.
• Put the airgun „ON SAFE“ (see chap. 2.1
"Handling the safety").
• Pull back the bolt lever of the rotary magazine retainer slide
(see the sequence in illustration 4.a).
• Place the drum in the airgun (illustration 4.b).
• Push the retainer of the drum.
• Push the bolt lever forward and lower it.
WARNING: A diabolo pellet is automatically loaded in the barrel during
the locking process.
WARNING:
Do not put your hand in front of the barrel. Do
not put your finger on the trigger.
Caution: Always point the barrel of the airgun
in a safe direction. Do not point the airgun at
people or animals.
LOADING THE RIFLE
2.4
Illustration 3.a
1.
2.
3.
Illustration 4.a Illustration 4.b
