5-9
4) Open the throttle slightly without
shifting using the throttle control grip,
neutral throttle lever or free accelera-
tor. (It is necessary to change the
throttle opening slightly depending
on the engine temperature.)
After the engine starts, return the
throttle to the original position.
5) Set the MAIN SWITCH to “ON”.
6) Set the MAIN SWITCH to “START”.
cC
8 Do not turn the main switch to
“START” when the engine is running.
8 Do not keep the starter-motor turning
for more than 5 seconds. The battery
will rapidly become exhausted and it
will be impossible for the starter-motor
to start the engine. If the engine does
not start within 5 seconds, return the
main switch to “ON”, wait 10 seconds,
and then crank the engine again.
7) After the engine starts, return the
emergency starter valve (if used) to
“CLOSE”.
NOTE:
When the starter mechanism malfunc-
tions, refer to “STARTER WILL NOT
OPERATE”.
E
ON
START
OFF
701022
N
701014
63D-9-15-5 4/18/01 10:43 AM Page 10
