A SERVICE OF

logo

Open as PDF
next previous
8-51
1
2
3
4
5
6
7
8
9
10
11
Rear
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25681
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
●
When installing a front wheel, make sure its ar-
row mark points toward the rotating direction
of the wheel.
●
When installing a rear wheel, make sure its
wording “SIDE FACING OUTWARDS” faces
outwards.
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1. Wheel nut
1. Arrow mark