Agilent Technologies 668xA Welding System User Manual


 
62 SCPI Conformance Information
NON-SCPI Commands
1
CAL:CURR[:DATA] CAL:VOLT:LEV OUTP:REL:POL
CAL:CURR:LEV CAL:VOLT:PROT OUTP:REL:POL?
CAL:CURR:MON [SOUR]:DIG:DATA[:VAL] OUTP:REL[:STAT]
CAL:PASS [SOUR]:DIG:DATA[:VAL]? OUTP:REL[:STAT]?
CAL:SAV DISP[:WIND]:MODE [SOUR]:VOLT:PROT[:AMPL]
CAL:VOLT[:DATA] DISP[:WIND]:MODE? [SOUR]:VOLT:PROT[:AMPL]?
1
See Appendix A - Calibration in the Operating Guide for CAL commands.